FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers G Parts

Category: Fuel System / Air Intake

[Categories] [All G Parts] [All Allis Chalmers Models]

Air Cleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on gas model. (A) bowl outside diameter at top: 7-1/4 inch. (B) cone inside diameter at top: 3-1/2 inch. (C) bowl side height: 3 inches. (D) overall height: 4-1/8 inches. Small bowl 7-1/4 inch diameter, for 2 inch to 3 inch inlet. For A, C, CH, CR, D17, F, F2, G, K, K2, L, M. (Item #: 157279, Ref: 71125804) $8.80

Air Cleaner Oil Cup - For Allis Chalmers tractor model G Replaces Allis Chalmers OEM number 70800760, 800760, , Compatible with Massey Harris tractor model Pacer, Pony, Replaces Massey Harris OEM number 1500476M91, O.D. at lip: 4.495", I.D.: 4.075", Height: 2.237", (Item #: 121750) $32.70

Air Cleaner Pipe Bracket - This Air Cleaner Pipe Bracket fits Allis Chalmers G. It replaces original part numbers 800142, 70800142 (Item #: 126385, Ref: 70800142) $21.80

Air Cleaner Tube - For model G. Replaces 800147. (Item #: 179114, Ref: R4011) $88.00

Basic Carburetor Kit - Fits TSV13, TSV16 and TSV24 Carbs. For model G. (Item #: 100732, Ref: MS100) $21.50

Carburetor - Copy of the original Marvel Schebler TSV13. Fits the Model G. Replaces: 800303, 70800303 (Item #: 107973, Ref: R4528) $368.00

Carburetor - This new carburetor is a Copy of the original Marvel Schebler TSV16, TSV13 and TSV24 for the Allis Chalmers G (Item #: 108419, Ref: R4529) $387.00

Carburetor Float - Carburetor float for carburetors TSV13, TSV16, TSV24 on model G. Replaces 70800472 (Item #: 108488, Ref: R2381) $28.10

No
Picture
Carburetor Kit - For Allis Chalmers tractor model G Replaces Allis Chalmers OEM number A609610, , Compatible with Massey Harris tractor model Pony, For Marvel Schebler Carburetor number TSX13, Replaces Massey Ferguson OEM number A609610, Kit contains gaskets and float valve., (Item #: 176622) $21.90

Carburetor Kit, Basic - For Marvel-Schebler numbers: TSV13, TSV16, TSV24. Includes: gaskets, needle, seat and throttle shaft. For tractor model G. (Item #: 182505, Ref: R7814) $38.50

Carburetor Kit, Economy - Kit for Marvel TSV13 carb. Used on Model: G (Item #: 100732, Ref: MS100) $21.50

Carburetor Repair Kit - For Allis Chalmers tractor model G, Replaces Allis Chalmers OEM number 70800303, For Marvel Schelber Carburetor No. TSV13, Repair kit includes: Throttle shaft, Needle and Seat, Float Lever Pin, Choke and Throttle shaft seal, Adjustment Screw, Gaskets and Instructions, (Item #: 152376) $84.00

Choke Rod - For Allis Chalmers tractor model G, Replaces Allis Chalmers OEM number 800118, Length 27-1/8", (Item #: 126117) $32.30

Fuel Line, Steel - 1/4 inch outside diameter, 11 inch overall length, 1/8 inch NPT thread, inverted flare nuts. For model G. (Item #: 182088, Ref: 800066) $28.10

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank - Primer color may vary, steel, sealed with Red Kote tank liner. For model G. Replaces: 70800070, 800070 (Item #: 125721, Ref: 800070) $570.72

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.00

Pre-Cleaner Assembly - 3" Inlet Pipe - For Allis Chalmers tractor model G Replaces Allis Chalmers OEM number 1306480, , Compatible with Case Construction and industrial model 580D, Compatible with International tractor model TD9, 544, 2544 Replaces International OEM number 321190R91, , Compatible with Massey Ferguson tractor model 97, 375, 383, 390, 393, 398, 399, 699, 3050, 3060, 3070, 3080, 3090, Compatible with Massey Ferguson Combine (s) 300, 410, 510, Compatible with Massey Ferguson Construction and industrial model 200 Replaces Massey Ferguson OEM number 1022558M91, , Compatible with Minneapolis Moline tractor model G705, G706, G707, G708, G900, G950, G1000, G1000 Vista Replaces Minneapolis Moline OEM number 10A19218, , Compatible with Oliver tractor model 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 2655, Compatible with White tractor model 2-70, Replaces White OEM number 105781AS, 3" I.D. on mounting end, (Item #: 126610) $47.80

Precleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on diesel models D2900, 649T prior to serial number 12201. (A) Bowl outside diameter at top: 10-1/2 inches. (B) Cone inside diameter at top: 5-9/16 inches. (C) Bowl side height: 3 inches. (D) Overall height: 4 inches. Large bowl 10-1/2 inch diameter, for 3 to 4 inch. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, D21, G, L, L2, M, M2. (Item #: 107972, Ref: 70651270) $11.30

Sediment Bowl Assembly - Fuel Strainer without valve. This sediment bowl assembly is used on Allis Chalmers G, 170 Gas serial number 7500 and Up, 175 Gas, 180 Gas. Replaces: 253122, 800069, 70253122, 70800069 (Item #: 112592, Ref: 614421R91) $30.50

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.30

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.50

Throttle Lever - This new Throttle Lever fits an Allis Chalmers G tractor. It replaces original part numbers 800149 and 70800149. The color of primer finish may vary. It measures 6-3/4 inches long, 3/4 inches wide, 0.104 inch thick. (Item #: 114937, Ref: 70800149) $20.50

Throttle Rod - This new Throttle Rod fits an Allis Chalmers G tractor. It is 45-1/4 inches over all and powder coated AC Orange. It replaces original part numbers 70800152 and 800152. (Item #: 180240, Ref: 70800152) $49.26

Throttle Rod Bracket - The new throttle rod bracket fits an Allis Chalmers G tractor. It replaces original part numbers 800302 and 70800302. (Item #: 180155, Ref: 70800302) $28.00

Universal Parts and Accessories
Category: Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $19.50

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.76

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $109.00

$Allis Chalmers G Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.30

$Allis Chalmers G Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $7.60

$Allis Chalmers G Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $6.80

$Allis Chalmers G Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.80

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $71.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.92

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.40

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $52.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.20

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.30

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$Allis Chalmers G Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $10.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All G Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy